Home > Select Vehicle > Chrysler 300c > Cold Air Intake > C&L Hemi Intake 5.7L/6.1L Charger/Challenger Magnum/300C
C&L Hemi Intake 5.7L/6.1L Charger/Challenger Magnum/300C
C&L Cold Air Intake System
Part Number U400
Supported Vehicles:
2005-2008 Chrysler 300C 5.7L/6.1L
2006-2008 Dodge Charger 5.7L/6.1L
2005-2008 Dodge Magnum 5.7L/6.1L
2008-2009 Dodge Challenger 5.7L/6.1L
18+ HP Gain Over Stock!
C&L Performance is proud to announce the availability of an ALL NEW air intake upgrade for owners of 5.7L and 6.1L SRT-8 Chrysler passenger car vehicles. These systems are designed to work with all HEMI equipped late model Charger, Magnum and 300C models. C&L GUARANTEE's that this is the highest flowing air intake system available for these vehicles, and it will support a higher level of power than any other competing units.
The C&L intake consists of an all new CNC machined cast aluminum inlet pipe assembly (with provisions for the IAT sensor, PCV hose connection and a special nitrous boss), a molded filter shroud assembly that attaches to the lower half of the factory air box assembly and a custom washable air filter that was developed specifically for this system. The air filter in this package maximizes the total amount of available area inside of the shroud assembly, and features over 180 square inches of filtration surface area! The original paper filter, which is more restrictive per square inch than our cotton mesh filter, has a total of only 89 square inches of filtration. Although the filter is visible when the hood is open, our rubber trim seal at the top of the filter shroud isolates the filter from the engine compartment heat once the hood is closed. This ensures that all airflow that enters the filter comes from below the body of the vehicle, just like the factory arrangement.
Part Number U400
Supported Vehicles:
2005-2008 Chrysler 300C 5.7L/6.1L
2006-2008 Dodge Charger 5.7L/6.1L
2005-2008 Dodge Magnum 5.7L/6.1L
2008-2009 Dodge Challenger 5.7L/6.1L
18+ HP Gain Over Stock!
C&L Performance is proud to announce the availability of an ALL NEW air intake upgrade for owners of 5.7L and 6.1L SRT-8 Chrysler passenger car vehicles. These systems are designed to work with all HEMI equipped late model Charger, Magnum and 300C models. C&L GUARANTEE's that this is the highest flowing air intake system available for these vehicles, and it will support a higher level of power than any other competing units.
The C&L intake consists of an all new CNC machined cast aluminum inlet pipe assembly (with provisions for the IAT sensor, PCV hose connection and a special nitrous boss), a molded filter shroud assembly that attaches to the lower half of the factory air box assembly and a custom washable air filter that was developed specifically for this system. The air filter in this package maximizes the total amount of available area inside of the shroud assembly, and features over 180 square inches of filtration surface area! The original paper filter, which is more restrictive per square inch than our cotton mesh filter, has a total of only 89 square inches of filtration. Although the filter is visible when the hood is open, our rubber trim seal at the top of the filter shroud isolates the filter from the engine compartment heat once the hood is closed. This ensures that all airflow that enters the filter comes from below the body of the vehicle, just like the factory arrangement.
